Sanyo PLC HF10000L User Manual

92
Optional Parts
Model No.
Optional Interface Board (Dual-SDI)
: POA-AMD17SDID
Optional Interface Board (Dual-Link SDI)
: POA-AMD22SDIDL
Optional Interface Board (DVI / D-sub 15)
: POA-AMD23ADI
Optional Interface Board (5-BNC / VIDEO)
: POA-AMD25VD3
The parts listed below are optionally available. When ordering those parts, specify the item name and Model No.
to the sales dealer.
l The specifications are subject to change without notice.
l LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny
fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.
l Each projector has its own characteristics.
When projecting with several projectors on the same screen or side by side, you may recognize different white balance
and color uniformity on each projector.
Appendix
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System
Industries Association). The projector supports all commands defined by PJLink Class 1 and is verified conformance with
PJLink Standard Class 1.
PJLink is a registered trademark of JBMIA and pending trademark in some countries.
Projector Input PJLink Input Parameter
INPUT 1
RGB (PC analog) RGB 1 11
RGB (Scart) RGB 2 12
RGB (PC Digital) DIGITAL 1 31
RGB (AV HDCP) DIGITAL 2 32
HDMI DIGITAL 3 33
INPUT 1 AUX1 46
INPUT 2
Video VIDEO 1 21
Y, Pb/Cb, Pr/Cr VIDEO 2 22
RGB RGB 3 13
S-Video VIDEO 5 25
INPUT 2 AUX 2 47
INPUT 3
INPUT 3 AUX 3 48
INPUT 4
INPUT 4 AUX 4 49
PJ Link Notice

Sanyo PLC HF10000L Specifications

General

Matrix size	1.65 \
Matrix type	3-panel (p-Si TFT active)
Projection distance	- m
Vertical scan range	48 - 100 Hz
Horizontal scan range	15 - 120 kHz
Projection technology	LCD
Contrast ratio (typical)	3000:1
Screen size compatibility	- \
Projector native resolution	-
Keystone correction, horizontal	30 °
Interface	USB
Power LED	Yes
RS-232 ports	2
Dimensions (WxDxH)	530 x 757 x 268 mm
Focus	Auto
Focal length range	- mm
Noise level	43 dB
Noise level (economic mode)	39 dB
Dot clock scanning frequency	230 MHz
Lamp power	380 W
Lamps quantity	2 lamp(s)
Light source type	Lamp
Service life of light source	2000 h
Service life of light source (economic mode)	3000 h
Composite video in	0
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity	1
Wi-Fi	No
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL M, PAL N, SECAM
Supported graphics resolutions	1024 x 768 (XGA), 1280 x 1024 (SXGA), 1600 x 1200 (UXGA), 1680 x 1050 (WSXGA+), 1920 x 1200 (WUXGA), 640 x 480 (VGA), 800 x 600 (SVGA)
Product color	Gray
Power consumption (standby)	18 W
Power consumption (typical)	955 W
Cables included	AC, RS-232

Weight and Dimensions

Weight	27600 g