Sanyo PLC-HF15000L

74
Maintenance and Care
Filter counter
Be sure to reset the Filter counter after replacing the filters.
Press the MENU button to display the On-Screen
Menu. Use the Point ! buttons to select Setting and
then press the Point  or the SELECT button.
Use the Point ! buttons to select Filter counter and
then press the SELECT button. Use the Point !
buttons to select Filter counter reset and then press
the SELECT button. Filter counter Reset? appears.
Select Yes to continue.
1
2
Filter counter Reset?
appears
.
Select Yes, then another
confirmation box
appears.
Select Yes again to reset
the Filter counter.
Another confirmation dialog box appears, select Yes to
reset the Filter counter.
3
Resetting the Filter Counter
Note:
•Whenever the filters have been replaced, reset the Filter
counter, but if the filters were not replaced, do not reset
the filter counter, as this could cause product damage.