35
ENGLISH
System
This function is to select the system of signal
input to the projector. The available system
mode are listed on the pull-down menu but-
ton according to the input signal. Select a
system and then click Set button.
Control
If the mode (Mode1 to Mode10) which is stored in the item "PC Adjustment" ( p.37) is available,
they are also listed together with the above mode.
Available selection at the RGB(PC analog) input
Item Description
XGA1 ........................It automatically switches to the proper computer system of the input signal.
* The computer system modes (VGA, SVGA, XGA. SXGA, UXGA, WXGA...) which
meet the input signal are listed.
Available selection at the RGB(PC digital)/RGB(AV HDCP)/HDMI input
Item Description
D-XGA......................It automatically switches to the proper computer system of the input signal.
* The computer system modes (D-VGA, D-SVGA, D-XGA. D-SXGA1...) which meet
the input signal are listed.
D-480p ....................It automatically switches to the proper scanning system of the input signal.
* The selectable scanning systems are D-480p, D-575p, D-720p, D-1035i, D-1080i
and D-1080p.
Available selection at the Video/S-video/Scart input
Item Description
AUTO........................It automatically switches to the proper color system of the input signal.
* The selectable color systems are PAL, SECAM, NTSC, NTSC4.43, PAL-M and
PAL-N.
* AUTO is fixed at the Scart input.
Available selection at the Component input
Item Description
AUTO........................It automatically switches to the proper scanning system of the input signal.
* The selectable scanning systems are 480i, 575i, 480p, 575p, 720p, 1035i, 1080i
and 1080p.
To Next Page
Loading...
Need help?
General
