51
Video Input
An interlaced video signal can be displayed in progressive
mode. Press the Point
buttons to change the
progressive scan mode.
Off ......... Progressive scan mode is Off.
On.......... Progressive scan mode is On.
Film........ For watching a film. With this function, the
projector reproduces pictures faithful to the
original film quality.
Noise interference on the screen can be reduced. Press the
Point
buttons to change the noise reduction mode.
Off ......... Noise reduction mode is Off.
On.......... Noise reduction mode is On.
Note
• Progressive cannot be selected when 480p, 575p, 720p, or
1080p is selected (p.47).
• Noise reduction cannot be selected with the computer input
and when the video signal format is 1080p. (p.47).
To store the adjusted data, select Store and press the
Point
or the SELECT button. Use the Point ! buttons
to select one from Images 1 to 10 and press the SELECT
button.
A confirmation box appears and then select Yes. Stored data
can be called up by selecting an Image (1-10) in the Image
Mode Selection on page 48.
A confirmation box appears and then
select Yes.
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
Yes. All adjustments will return to their previous figures.
Reset
Store
Noise reduction
Progressive
To Next Page
Loading...
Need help?
General
