65
When the projector is locked with a PIN code, the
PIN code lock symbol appears in the Guide.
To change the PIN code lock setting
To enter a PIN code
When using side control
Use the Point ! buttons on the side control to select a number.
Press the Point button to fix the number and move the red
frame pointer to the next box. The number changes to “3.”
Repeat this step to complete entering a four-digit number. After
entering the four-digit number, move the pointer to “Set.” Press
the SELECT button so that you can change the PIN code lock
setting.
When using remote control
Press the Number buttons on the remote control to enter a
number (p.16). When you complete entering a four-digit number,
the pointer moves to “Set.” Press the SELECT button so that you
can change the PIN code lock setting.
If you fixed an incorrect number, use the Point button to move
the pointer to the number you want to correct, and then enter the
correct number.
If you entered an incorrect PIN code, “PIN code” and the number
(3333) will turn red for a moment. Enter the correct PIN code all
over again.
The PIN code can be changed to your desired four-digit
number. Press the Point
button to select PIN code change
and press the SELECT button. The Current PIN code dialog
box appears. Use the Point
! buttons or the Number
buttons on the remote control to set the current PIN code.
The New PIN code dialog box appears. Set a new PIN code,
the confirmation box appears, and choose Yes to set the
new PIN code.
To change the PIN code
To change PIN code
CAUTION:
WHEN YOU HAVE CHANGED THE PIN CODE, WRITE DOWN
THE NEW PIN CODE IN COLUMN OF THE PIN CODE NO.
MEMO ON PAGE 95, AND KEEP IT SECURELY. IF YOU FORGET
YOUR PIN CODE, THE PROJECTOR CAN NO LONGER BE
STARTED.
Settings
Use the Point ! buttons to select OFF, On 1 or On 2.
Press the SELECT button to close the dialog box.
To Next Page
Loading...
Need help?
General
