Sanyo PLC-WTC500L - Page 23

-23-
Mechanical Disassembly
2-1. Main Board removal-1
1. Remove 6 screws-A (M3x6) and 7 screws-B (M3x6).
2. Remove the Main Shield Top, Lamp Shield and Mirror Shield.
B
A
A
A
A
B
B
B
B
B
A
A
Main shield
top
Lamp shield
top
Main shield
bottom
Spacer
Main board
C
C
Spacer
B
Mirror shield
2-2. Main Board removal-2
1. Remove 2 screws-C (M3x6) on the AV panel and take out the Main Board
upward off.
2. Remove the Spacer and Main Shield Bottom.