-14-
Mechanical Disassembly
x Main Board , Control Board, Rear Panel and Fan(FN902) removal
1. Remove 2 screws A (T3x8) and 2 screws B (M2.5x6) to remove the Control
Board from the Control board holder.
2. Remove 2 screws D (M4x8), 2screws E (T3x8) and 2 screws F (M2.5x6) to
remove the main board shield.
3. Remove 2 screws G (M2.5x6) to remove the main board.
4. Unhook 3 hooks and remove the Rear Panel.
5. Remove 2 screws J (T3x8) to remove the fan (FN902).
Rear panel
Main board
G (M2.5x6)x2
Fig.2
Control board
D(M4x8)x2
FN902
Control board holder
Main board shield
J (T3x8)x2
E (T3x8)x2
F(M2.5x6)x2
A (T3x8)x2
B (M2.5x6)x2
A
B
D
E
F
G
G
SW901
Hooks
To Next Page
Loading...
