-15-
Mechanical Disassembly
Fig.3
1. Remove 6 screws A (T3x8) to remove the Optical Unit and remove 4 screws B(M2.5x4)
to remove the Projection Lens.
2. Remove the RC Board.
3 .Remove 2 screws C(T3X8) and 1 screw D(M3X6) to remove the Security Kits.
4. Remove 2 screws E(T3x8) and 2 screws F (T3x8) to remove the speaker (SP901).
5. Remove 2 screws G(T3x8) and one black screw H (T3x12) to remove fan (FN906).
c Opitcal Unit, RC Board,Security Kits, Speaker (SP901) and Fan (FN906)
Removal
Projection Lens
Optical unit
B (M2.5x8)x4
A (T3x8)x6
G (T3x8)x2
FN906
H (T3x12)
RC Board
SP901
D (M3x6)
C (T3x8)X2
E (T3x8)X2
Security
Kits
F (T3x8)X2
To Next Page
Loading...
