-16-
Mechanical Disassembly
v Filter Board, Fan(FN901), Power Board, Ballast Board and SW902
removal
Fig.4
1. Remove 3 screwsA (T3x8), 2 screws B(M4x8) to take off the Filter board ass'y and then remove 7
screws C(M3x6) to remove the Filter Board Holder, Filter Board Sheet and the Filter Board.
2. Remove 2 screws D(T3x8) to remove the fan (FN901 ).
3. Remove 2 screws E(M4x8) and 2 screws F(T3x8) to remove the power and ballast ass'y from the
cabinet bottom.
4. Remove screw G(M4x8) and 3 screws H(M3x6) to remove the Ballast Board.
5. Remove 2 screws I (T3x8) and 2 screws J (M3x6) to remove SW902.
6. Remove 2 screws K (M3x6) and a black hook to remove the power board.
7. Remove 3 screws L(T3x8) to remove the Lens Holder.
Filter Board
Holder
Filter Board
B (M4x8)X2
Filter Board
Sheet
B
C
C (M3x6)x7
C
C
C
C
A (T3x8)
C
FN901
SW902
Power Board
D (T3x8)x2
E (M4x8)x2
E
F (T3x8)x2
G (M4x8)
Ballast Board
H (M3x6)x3
Spacer_Sheet of
Power_Back
I (T3x8)x2
J (M3x6)x2
K (M3x6)x2
White
hooks
Black
hooks
I
J
K
H
H
F
Shileld Cover
A
A
L (T3x8)
L
L
Lens Holder
To Next Page
Loading...
