Sanyo PLC-XC56 - Image Adjustment

34
Computer Input
Image Adjust Menu
Press the MENU button to display the On-Screen
Menu. Use the Point
Ÿź buttons to select Image
adjust and then press the Point
Źor the SELECT
button.
1
2
Use the Point Ÿź buttons select the desired item
and then press the SELECT button to display the
adjustment dialog box. Use the Point
ŻŹ buttons to
adjust the setting value.
3Note:
• When White balance Red, Green or Blue is
adjusted, Color temp. will change to User.
• When Blackboard(Green) or Colorboard
is selected in Image select, Color temp. will
change to Blackboard or Colorboard.
Press the Point Ż button to decrease the contrast; press the
Point
Źbutton to increase the contrast (from 0 to 63).
Press the Point Ż button to decrease the brightness; press
the Point
Źbutton to increase the brightness (from 0 to 63).
Press the PointŻ button to lighten red tone; press the Point
Ź button to deepen red tone (from 0 to 63).
Press the Point Ż button to lighten green tone; press the
Point
Ź button to deepen green tone (from 0 to 63).
Press the Point Ż button to lighten blue tone; press the
Point
Ź button to deepen blue tone (from 0 to 63).
Use the Point ŻŹ buttons to select the desired Color temp.
level (XLow, Low, Mid, or High).
Use the Point ŻŹ buttons to adjust the gamma value to
obtain a better balance of contrast (from 0 to 15).
Press the Point Ż button to decrease the sharpness of the
image; press the Point
Ź button to increase the sharpness
of the image (from 0 to 15).
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
Yes. All adjustments will return to their previous figures.
Use the Point ŻŹ
buttons to adjust the
setting value.
Selected Image mode
Contrast
Brightness
Color temp.
White balance (Red)
White balance (Green)
White balance (Blue)
Sharpness
Gamma
Reset
Image Adjustment