Sanyo PLC-XC56 - Resetting the Filter Counter; Resetting the Scroll Counter

62
Maintenance and Cleaning
Be sure to reset the Filter counter after replacing the filter
cartridge.
Press the MENU button to display the On-Screen
Menu. Use the Point
Ÿź buttons to select the Setting
and then press the Point
Ź or SELECT buttons.
Use the Point Ÿź buttons select Filter counter and
then press the Point
Ź or SELECT button. Use the
Point
Ÿźbuttons to select Filter counter reset and
then press SELECT button. The Filter counter Reset?
appears. Select Yes to continue.
1
2
Filter counter
The Filter counter
Reset? appears.
Select Yes, then
another confirmation
box appears.
Select Yes again
to reset the Filter
counter.
Another confirmation dialog box appears, select Yes to
reset the Filter counter.
3
Be sure to reset the Scroll counter after replacing the filter
cartridge.
Press the MENU button to display the On-Screen
Menu. Use the Point
Ÿź buttons to select the Setting
and then press the Point
Ź or SELECT buttons.
Use the Point Ÿź buttons select Filter counter and
then press the Point
Ź or SELECT button. Use the
Point
Ÿźbuttons to select Scroll counter Reset and
then press SELECT button. The Scroll counter Reset?
appears. Select Yes to continue.
1
2
Scroll counter
The Scroll counter
Reset? appears.
Select Yes, then
another confirmation
box appears.
Select Yes again
to reset the Scroll
counter.
Another confirmation dialog box appears, select Yes to
reset the Scroll counter.
3
Resetting the Filter Counter
Resetting the Scroll Counter