39
Video Input
1
AV System Menu (Video or S-video)
AV System Menu (Component)
2
If the projector cannot reproduce proper video image,
select a specific broadcast signal format from among PAL,
SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.
The projector automatically detects an incoming video
signal, and adjusts itself to optimize its performance.
If the projector cannot reproduce proper video image, select
a specific component video signal format from among 480i,
575i, 480p, 575p, 720p, 1035i, and 1080i.
The projector automatically detects an incoming video
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the system
manually.
3Note:
The AV System Menu cannot be selected when selecting
RGB (Scart).
Press the MENU button to display the On-Screen
Menu. Use the Point
Ÿź buttons to select Input and
then press the Point
Ź
or the SELECT buttons.
Use the Point
Ÿź buttons to select Video or S-video
or Computer 1(Component) and then press the
SELECT button.
3
Use the Point Ÿź buttons to select System and then
press the Point
Ź
or the SELECT button. Use the Point
Ÿźbuttons to select the desired system and then
press the SELECT button.
To Next Page
Loading...
