Sanyo PLC-XM100 User Manual

73
Input
RGB (PC analog)
Y, Pb/Cb,Pr/Cr
RGB (Scart)
RGB (PC digital)
RGB (AV HDCP)
Network
Video
RGB
Video
Y, Pb/Cb,Pr/Cr
S-video
Input 3
Input
H-sync freq.
V-sync freq.
Information
Screen
Language
Lamp status
Power management
Remote control
3Note:
The Menu display varies depending on the input signal.
Appendix
Volume
Mute On/Off
Sound
0–63
Built-in SP
PIN code lock
Key lock
SERIAL NO.
Network will be displayed only when an optional PJ-Net Organizer
is attached.
*
*
Input 1
Input 2
Lamp counter
Filter counter
Simple mode
On/Off
System
(1)
Mode 1
Mode 2
¼ System displayed in the System Menu varies depending on the input signal.
SVGA 1
SVGA 2
SVGA 3
Image adjust
Contrast
Brightness
Color temp.
Red
Gamma
Store
0–63
0–63
0–63
0–15
Image 1
Image 10
Reset Yes/No
Sharpness
0–31
Green
Blue
0–63
0–63
Mid
Low
XLow
Adj
High
Offset
Red/Green/Blue
Image select
Standard
Real
Image 1
Image 10
PC adjust
Auto PC adj.
Fine sync.
Total dots
Position H
Position V
Current mode
Clamp
Display area - H
Display area - V
Reset
Mode free
Store
0–31
Yes/No
Mode 1
Mode 10
Quit
Menu Tree
Computer Input/Video Input
Computer Input
Image adjust
Image select
PC adjust
Sound
Information
Input

Sanyo PLC-XM100 Specifications

General

Vertical scan range	48 - 100 Hz
Horizontal scan range	15 - 100 kHz
Projection technology	LCD
Contrast ratio (typical)	1000:1
Projector native resolution	XGA (1024x768)
Aspect ratio	4:3
RS-232 ports	1
Dimensions (WxDxH)	497.8 x 375.9 x 165.1 mm
Lamp type	NSH
Lamp power	275 W
Light source type	Lamp
Focus	Manual
RMS rated power	7 W
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Noise level	31 dB

Weight and Dimensions

Weight	9661.5 g