q
w
e
t
u
i
o
u LAMP REPLACE indicator
Turn yellow when the life of the projection lamp
draws to an end. (p52, 58)
y WARNING indicator
Emit a red light when the projector detects
abnormal condition. This also blinks red when the
internal temperature of the projector exceeds the
operating range. (p49, 58)
w POWER ON–OFF button
Turn the projector on or off. (p18, 19)
r POWER indicator
Emit a red light until the projector gets ready to be
turned on. It turns red when the projector is in the
stand-by mode. It remains green while the
projector is under operation. (p18, 19, 58)
t INPUT button
Select input source. (p25, 34, 35)
e MENU button
Open or close the On-Screen Menu. (p20)
o POINT (ed7 8 ) buttons
– Select an item or adjust the value in the On-
Screen Menu. (p20)
– Pan the image in Digital zoom + mode. (p33)
– Adjust the volume level. (Point 7 8 buttons)
(p23)
q SELECT button
– Execute the selected item. (p20)
– Expand or compress the image in Digital zoom
mode. (p33)
i KEYSTONE button
Correct the keystone distortion. (p22, 41)
Top Control
r
y
To Next Page
Loading...
