161 English
TV OUTPUT SETTING
3 Select the desired setting, and press the SET button.
h The screen to change the parameter for the selected setting appears.
<If “TV SYSTEM” is selected>
NTSC: Outputs NTSC video signals.
PAL: Outputs PAL video signals.
<If “TV TYPE” is selected>
4:3: Use this setting when a TV having an aspect ratio of 4:3 is
connected.
16:9: Use this setting when a TV having an aspect ratio of 16:9 is
connected.
<If “HDMI” is selected>
AUTO: The output signal is automatically set to match the connected
TV.
720p: Choose this setting if your TV is equipped with a 720p
connector.
1080i: Choose this setting if your TV is equipped with a 1080i
connector.
480p: Choose this setting if your TV is equipped with a 480p
connector.
* Does not work with 480i connector.
<If “COMPONENT” is selected>
720p: Choose this setting if your TV is equipped with a 720p
connector.
1080i: Choose this setting if your TV is equipped with a 1080i
connector.
480p: Choose this setting if your TV is equipped with a 480p
connector.
* Does not work with 480i connector.
<If “HDMI-CEC” is selected>
ON: Sets the HDMI-CEC function to “ON”.
OFF: Sets the HDMI-CEC function to “OFF”.
To Next Page
Loading...
