OPTION SETTINGS
English 162
4 Toggle the SET button up or down to select the desired parameter.
5 Press the SET button.
6 Press the MENU button.
h This completes the TV output setting.
HINT
About the HDMI-CEC function
i This is a system control function by which, through an HDMI cable, a
control signal is output to electronic devices and the operation of multiple
devices is coordinated.
i The HDMI-CEC function will operate correctly only when the camera is
connected to a SANYO TV that incorporates the HDMI-CEC function.
i HDMI-CEC works to couple the TV power source and the camera power
source, for example, but the camera's power save function is disabled.
i For information concerning connecting and operation, please see your
TV's instruction manual.
(As of May 2008, SANYO TVs that incorcorporate the HDMI-CEC function
have not been released.)
To Next Page
Loading...
