38
● Select the “Second tare memory” application
in the menu: Press the ) p p keys, )
repeatedly if needed, until
2 1 3 Second tare memory or
2 1 10 Second tare memory with auto-taring
is displayed
● Confirm selection:
Press and hold the p key
> o indicates the selected item
● To select second tare memory parameters:
Press p
● Select and confirm:
– Weight unit 1: (see also “Toggle between
Weight Units”)
1 7 2 Grams
... ...
1 7 22 lb / oz
– Weight unit 2: (see also “Toggle between
Weight Units”)
3 1 2 Grams
... ...
3 1 22 lb / oz
See also the “Scale Operating Menu (Overview)”
in the chapter entitled “Configuring the Scale”
● Save settings and exit the operating menu:
Press and hold the ) key
Additional Functions
In addition to the basic functions (power off,
zeroing, taring and printing), you can also access
the following functions from this application:
– Save weight value in second tare memory
(v key)
– Clear tare memory (c key)
– Toggle weight units (w key)
To Next Page
Loading...
