47
Preparation
Select the “Totalizing” application in the
operating menu:
$ Turn off the scale: Press e
● Turn on the scale: Press e; while all segments
are lit, press the ) key briefly
● Select the “Totalizing” menu item:
Press the ) p p keys, ) repeatedly
if needed, until
2 1 8 Totalizing is displayed
● Confirm selection: Press and hold the p key
> o indicates the selected item
● To select totalizing parameters:
Press p
● Select and confirm:
– Weight unit 1: (see also “Toggle between
Weight Units”)
1 7 2 Grams
... ...
1 7 22 lb / oz
See also the “Scale Operating Menu (Overview)”
in the chapter entitled “Configuring the Scale”
● Save settings and exit the operating menu:
Press and hold the ) key
Additional Functions
In addition to the basic functions (power off,
zeroing, taring and printing), you can also access
the following functions from this application:
– Start application (v key)
– View value in totalizing memory (press and hold
the v key)
– Clear totalizing memory (c key)
To Next Page
Loading...
