57
Printing a Data Record
Purpose
You can generate a printout of weights as well as
other measured values and identifiers for
documentation purposes. You can format the
printout to meet individual requirements.
Available Features
The printout can be configured to include 2 user-
defined header lines of 14 characters each. These
text lines are entered either at the Sartorius factory
or on location with a special program that uses the
BPI interface command sequence.
Print an individual weight or net, gross and
tare weights.
Line format: You can configure a data ID code of
up to 6 characters for each of the values printed; this
data ID code is printed at the beginning of the line.
Printouts are generated automatically or by pressing
the p key, dependent on or independent of scale
stability
You can have the following values output
automatically when using the application programs
if menu code 7 1 2 or 7 1 3 is configured (printout
with data ID codes):
– Second tare memory: last net value
– Counting: Reference weight for one piece
(average piece weight)
– Weighing in percent: Reference weight for the
percentage selected
– Totalizing: Current weight, total weight (net)
– Averaging: Result of measurement