1 About This Document
1.1 Scope
These instructions apply to color-mixing scale models:
− EVO1S1
− SPO1S1
1.2 Symbols Used
The term “device” used in these instructions always refers to
the combined unit of scale and AC adapter.
1.2.1 Warnings
WARNING
Denotes a danger with risk that death or severe injury may
result if it is not avoided.
CAUTION
Denotes a danger with risk that moderate or minor injury may
result if it is not avoided.
NOTICE
Denotes a danger that can result in property damage if the
risk is not avoided.
1.2.2 Other Symbols
t
Required action: Describes actions which must be
carried out.
y
Result: Describes the result of the actions carried
out.
[ ] Text inside brackets refers to control and display
elements.
This symbol provides information for the sale of
scales verified for use in legal metrology.
In the following, the term “verified” is used to
mean “verified for use in legal metrology” or
“conformity-assessed.”
Figures on the Operating Display
The figures in these instructions are based on “standard”
scales. On verified scales, some displays and reports may
deviate slightly from the figures. Where this is significant for
operation, the differences will be explained in the text.
2 Safety Instructions
2.1 Intended Use
This scale is only intended for mixing colors and paints outside
of potentially explosive atmospheres. Appropriate containers
must be used for loading each type of material.
The scale can be operated via the display as a stand-alone
device or using application software (e.g., a paint-mixing
program from a paint manufacturer) installed on a connected
PC. The PC is connected to the scale via a USB cable.
These instructions are part of the device. The device is
intended exclusively for use in accordance with these
instructions.
Any further use beyond this is considered improper. If the
device is not used properly:
The protective systems of the device may be impaired. This
can lead to unforeseeable personal injury or property damage.
In the event of use in systems and under ambient conditions
with higher safety requirements, you must observe the
requirements and provisions applicable in your country.
Contents
1 About This Document.....................................3
1.1 Scope.................................................. 3
1.2 Symbols Used .........................................3
2 Safety Instructions
........................................3
2.1 Intended Use.......................................... 3
2.2 Personnel Qualification ...............................4
2.3 Significance of these Instructions ....................4
2.4 Proper Working Order of the Device .................4
2.5 Work on the Electrical Equipment of the Device.....4
2.6 Personal Protective Equipment .......................5
2.7 Safety Instructions Concerning Operation
of the Device..........................................5
3 Installation
................................................5
3.1 Scope of Delivery .....................................5
3.2 Unpacking.............................................5
3.3 Selecting a Setup Location ...........................5
3.4 Installing the Scale....................................5
3.5 Establishing the Power Supply........................6
3.6 Anti-theft Locking Device ............................6
3.7 Leveling ...............................................7
3.8 Warm-up Time ........................................ 7
4 Cleaning and Maintenance
...............................7
4.1 Cleaning............................................... 7
4.2 Servicing ..............................................7
5 Disposal
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5.1 Information on Decontamination ....................8
6 Accessories
.................................................8
7 Technical Data
.............................................9
7.1 General Data ..........................................9
7.2 Model-specific Data .................................10
7.3 Verified Models with EC Type Approval Certificate:
Model-Specific Technical Specifications.............10
8 EU Declaration of Conformity
..........................10
Installation Instructions EVO1S1 | SPO1S1 3
English
To Next Page
Loading...
