Sartorius MA160 - Password Management; Service Mode;Service Access

35
System Settings (Setup Menu)
Operating Instructions Moisture Analyzer MA160
Passw. 1
12
3
45
6
78
9
0
C
t Enter a number as the password. The password must not exceed a length of
7 characters.
If you have made a mistake, you can correct your entry:
– k button: Delete individual characters in reverse order.
– C button: Delete all characters.
Passw. 2
12
3
45
6
78
9
0
C
t Enter the same password again to check your entry.
t Confirm with l.
Password
Device has password protection.
y The message “Device has password protection.” appears.
y The new password is only active once you have returned to the first level of the
menu.
Protected mode
Modify password
Delete password
t To change the password, select Modify password.
t Enter the desired password and confirm with l.
t To delete the password, select Reset password and confirm with YES.
If you have forgotten the password, contact the Sartorius Service Center.
Service Mode/Service Access
Service access
Access code: xxxxxx
This function is used by the Sartorius Service Center and can only be accessed by
authorized service technicians.