20
Operating Instructions Moisture Analyzer MA160
Operating the Moisture Analyzer
Operating the Moisture Analyzer
Switching the Analyzer On and Off (Standby)
y The main screen appears after the moisture analyzer has been switched on.
– The default language for the display text is English.
– You can change the language (see “Setting the Language” on page 21).
t To switch the moisture analyzer to standby, select the menu key at the bottom
left of the main screen on the display.
y The menu is displayed.
t Select the
j button in the menu.
y The moisture analyzer switches to standby mode.
t To switch the moisture analyzer on again: Select j on the display.
The moisture analyzer starts in the method most recently used before the
analyzer was last switched off.
Moisture in %M
Start new measurement
Standard
Fully automatic
130 °C
Wednesday, 2014-01-08 16:50
Standard
Coffee creamer
130 °C
Fully automatic
100 °C
Fully automatic
Oats
80 °C
Fully automatic
Washing powder
85 °C
Semi-automatic
Starch
80 °C
Semi-automatic
To Next Page
Loading...
