Sartorius MA160 - Page 64

64
USB Port
Operating Instructions Moisture Analyzer MA160
(1) USB Connection as PC Keyboard without Additional Driver via a PC with
Table or Spreadsheet Editor (e.g., Microsoft
®
Office or OpenOffice)
t Connect the moisture analyzer to your PC using the designated USB connection
cable.
t To open the system settings of the moisture analyzer, select i (Setup) in the
menu.
Device / Protocol
PC - SBI
PC spreadsheet format
PC text format
Off
t To open the PC spreadsheet format menu item on the moisture analyzer, go
to USB port and select Device/Protocol.
Setting Options:
t To change the moisture analyzer to suit your PC settings, define the following
system settings [further information can be found in chapter “System Settings
(Setup Menu)”, USB Port]:
– Choose the character to be used as a decimal point for the spreadsheet
calculation.
– Emulation of the PC keyboard for English (USA) instead of Universal
(Num Lock on):
y Once data has been transferred to your PC, the following appears on the PC:
– When PC spreadsheet format is set on the moisture analyzer,
e.g., when Microsoft Excel is opened:
t Activate the cursor in the PC application.
t Then select a or n on the moisture analyzer for the relevant data
output.