74
Care and Maintenance
Operating Instructions Moisture Analyzer MA160
3) Clean the heating element and temperature sensor with a weak solvent such as
ethanol.
4) If necessary, pull the air extractor grate out of the heating module. Then clean
the heating module and grate in a dishwasher.
5) Once cleaning is complete, reassemble the heating module and reinstall in the
analyzer, following the instructions in reverse order. The heating module must
snap into place on the analyzer.
Cleaning the Sample Chamber Base Plate
Danger of Burns:
Parts of the sample chamber may be extremely hot.
Wait until the sample chamber base plate has cooled completely.
Removing the Sample Chamber Base Plate
1) Unlock the cover socket with a suitable coin.
To Next Page
Loading...
