Sartorius MA160 - Setting Up the Analyzer; Compensating for Unevenness of Setup Surface; Anti-theft Locking Device

9
Commissioning
Operating Instructions Moisture Analyzer MA160
Setting Up the Analyzer
t Assemble the parts in the following order:
– Pan support
– Disposable sample pan
– The in-use dust cover over the control panel is put into place at the factory.
Compensating for Unevenness of Setup Surface
t Twist the leveling feet until any slight unevenness in the setup surface is
rectified and the analyzer is stable.
Anti-theft Locking Device
– To protect against theft, the analyzer has a fastening point for a security lock
if required.
t A Kensington key lock can be installed at the fastening point on the back of
the analyzer if required.