52
Service Manual Signum
Error Codes
Display Cause Solution
Inf 74 Function is blocked (e.g., menu is locked) None
Inf 98 No weighing platform connected Connect weighing platform
Inf 99 No weighing platform connected Connect weighing platform
NO WP No weighing platform connected Connect weighing platform
In addition to standard tools, you will need the following special tools and
programs to work on Signum series scales
Designation Order No.
- Sartorius Service Software (H8S) 6740-88
with USB dongle
*)
- Sartorius Service Software (H8S) 6740-89
with LPT dongle
*)
*)
Registration in ISSS required
To Next Page
Loading...
