Sartorius SIWRDCP - Interface and Printer Configurations; SMA Interface and Printer Settings; Printer Configuration for YDP Models

Signum 1-2-3
Settings
29
Setup
Com1
2
datProt
SMA SMA interface function
5.1. Baud rate
5. 1. 1 150 baud
5. 1. 2 300 baud
5. 1. 3 600 baud
5. 1. 4 1200 baud
5. 1. 5 2400 baud
5. 1. 6 4800 baud
5. 1. 7 * 9600 baud
5. 1. 8 19200 baud
5.2. to 5.6.
Numeric menu similar to SBI
Printer Printer configuration
YDP01IS YDP01IS
line* Strip printer
label Label printer
lab ff Label printer with manual feed
YDP02 YDP02 variants
5.1. Baud rate
5.1.4 * 1200 baud
5.1.5 2400 baud
5.1.6 4800 baud
5.1.7 9600 baud
5.2. Parity
5.2.2 Space
2
)
5.2.3 * Odd
5.2.4 Even
5.3. Number of stop bits
5.3.1 * 1 stop bit
5.3.2 2 stop bits
5.4. Handshake mode
5.4.1 Software handshake
5.4.3 * Hardware handshake, 1 character after CTS
YDP03 YDP03-0CE, YDP20-0CE
5.1. Baud rate
5.1.4 * 1200 baud
5.1.5 2400 baud
5.1.6 4800 baud
5.1.7 9600 baud
5.1.8 19200 baud
5.2. to 5.4.
Numeric menu similar to YDP02
YDP02IS YDP02IS
line * Strip printer
label Label printer
* Factory setting