Sartorius SIWRDCP - Barcode and Printout Configuration; Barcode Input and ID Code Settings; Printout Configuration and List Management

Signum 1-2-3
Settings
Settings
35
Setup
barcode
6
Barcode
(Display designation of this menu level: 6 )
ref * Store value as reference
tare Store value as tare
ID1
1
) Save as ID 1
Input Enter value on display (triggered when a key is pressed)
Header Store value as tare or ID code, depending on barcode header
ext.keyb External computer keypad
prtprot
7
Printouts
(Display designation of this menu level: 7 )
7. 4. Header and ID header input
7. 4. 1 (blank) Header line 1 (max. 20 characters); example: “MEYER’S"
7. 4. 2 (blank) Header line 2 (max. 20 characters); example: “STEEL"
7. 4. 3 (ID 1) ID code name for ID 1 (max. 20 characters)
1
)
7. 4. 4 (ID 2) ID code name for ID 2 (max. 20 characters)
1
)
7. 4. 5 (ID 3) ID code name for ID 3 (max. 20 characters)
1
)
7. 4. 6 (ID 4) ID code name for ID 4 (max. 20 characters)
1
)
7. 5. Quantity of individual printout, interface 1
7. 5. 1 * 1 printout
7. 5. 2 2 printouts
7. 6. Configuration list, individual, interface 1
blank
-------
form-fe
dat/tim
2
)
time
2
)
gmphead
gmpfoot
trans.no
id1
1
)
id2
1
)
id3
1
)
id4
1
)
net
gross
tare
tare2
headr. 1
headr. 2
sn scale
7. 7. Configuration list, components, interface 1
blank
’’
sn scale
7. 8. Configuration list, total, interface 1
blank
———-
form-fe
dat/tim
2
)
time
2
)
glphead
glpfoot
trans.no
id1
1
)
id2
1
)
id3
1
)
id4
1
)
headr. 1
headr. 2
sn scale
7. 9. Quantity of individual printout, interface 2
7. 9. 1 * 1 printout
7. 9. 2 2 printouts
1
) For Signum
®
3 only
2
) Only active when the device is equipped with a clock module