Sartorius SIWRDCP - Example: Defining Three Classification Classes

Signum 1-2-3
Classification Application
W
71
Example:
Defining three classes.
Settings (different from the factory settings):
Setup: Application 2: Classification
Setup: Printout, PRTPROT 7.6, then select the menu line items of your choice
O
1.) Begin input of
class delimiters
110
2.) For Signum
®
3 only:
Enter the upper limit for
Class 1 using the keypad
(in this example, 110 g)
O
3.) Save the upper limit for
Class 1
130
4.) For Signum
®
3 only:
Enter the upper limit for
Class 2 using the keypad
(in this example, 130 g)
O
5.) Save the upper limit for
Class 2
6.) Place the sample on the
weighing platform
Read the result
p
7.) Print the results
Note: If automatic printout of
results is enabled, you do not
need to press the p key.
The results are printed
automatically.
Lim1 + 0.110 kg Configured printout:
Lim2 + 0.130 kg see page 81
G# + 0.118 kg
T + 0.000 kg
N + 0.118 g
Class 2
-------------------
+