Sartorius SIWRDCP - Example: Application Combinations (Portioning) - Steps

Signum 1-2-3
Configuring Printouts Examples of Application Combinations in Signum® 3
80
If the weight is too light, an
error code is shown in the
main display:
Inf 29
Reduce the minimum load
setting or increase the
reference sample quantity
setting and the number of
parts in the container
D
7.) Toggle to Checkweighing
O
8.) Initialize Checkweighing
100
9.) Enter target value, minimum
and maximum (in this
example, target 100 pieces,
minimum 100 pieces,
maximum 102 pieces)
O
100
O
102
O
D
10.) Toggle to Totalizing
11.) Add desired number of
pieces
The number of pieces is
saved automatically
12.) Unload the scale:
Remove the samples
13.) Perform further counting
operations as desired
w
14.) Toggle display from
individual value to total
c
15.) End the portioning options
and print the final evaluation
--------------------
nRef + 10 pcs Configured printout: Total
wRef + 0.001000 kg
Setp + 100 pcs
Min + 100 pcs
Max + 102 pcs
n 6
*N + 0.600 kg
Total + 600 pcs
--------------------