27
Address Description Options/Range Units Type R/W Notes
+2 Phase energy calculation mode
E
0=disabled, 1=enabled UINT16 R
+3-9 Reserved UINT16 R Read as 65535
+10 Energy LED test mode
E
0=disabled, 1=Wh test, 2=varh test UINT16 R LED pulse rate is 10,000 pulses/kWh
+11 Starting voltage, percent of FS voltage 15-50
×0.1%
UINT16 R Default 1.5%
+12-13 Reserved UINT16 R Read as 65535
+14 Device resolution (see Section 4 for details) 0 = Low resolution, 1 = High
resolution
UINT16 R Default 0
Clock Setup
0x8780
Local time, in seconds, since Jan 1, 1970 F1 sec UINT32
R/W
To Next Page
Loading...
Need help?
General
