Satec PM290 User Manual

20 Chapter 3 Setup
3.7 Memory Buffer: buF
This parameter defines the number of measurements which will serve
as the basis for calculating average values of voltage, current and
power.
- Press SELECT; the dot will disappear.
- Use the ⇑ ⇓ keys to scroll to the appropriate value:
nor (normal) = 8 (for stable voltage and current situations)
unSt (unstable) = 32 (for unstable voltage and current situations.
Readings in this mode will be slower.).
- Press RESET; the dot will re-appear.
UNBALANCED CURRENT/
A PPAREN T POWER
FREQUENCY
CURRENT
CURRENT
CURRENT
VOLTAGE
VOLTAGE
VOLTAGE
ACTIVE ENERGY
MAX.DEM AND
REACTIVE POWER
POWER FACTOR
ACTIVE POWER
MODEL
nor buF.
MAX. AMP DEMAND
290
MAX. AMP DEMAND
MAX. AMP DEMAND
REACTIVE ENERGY
Use the ⇑ key to move to the next setup parameter.
3.8 Reset: rSt
This parameter enables/disables the reset of energies and demands.
- Press SELECT; the dot will disappear.
- Use the ⇑ ⇓ keys to scroll to the appropriate value:
ON = reset function enabled; OFF = reset function disabled
- Press RESET; the dot will re-appear.
A PPA RENT POWER
FREQUENCY
CURRENT
CURRENT
CURRENT
VOLTAGE
VOLTAGE
VOLTAGE
ACTIVE ENERGY
MAX.D EMAND
REACTIVE POWER
POWER FACTOR
AC TIV E PO WE R
MODEL
OFF rSt.
MA X . A MP D E MA N D
290
MA X . A MP D E MA N D
MA X . A MP D E MA N D
REACTIV E ENERGY
Use the ⇑ key to move to the next setup parameter.

Satec PM290 Specifications

General

Brand	Satec
Model	PM290
Category	Measuring Instruments
Language	English