i
LIMITED WARRANTY
The manufacturer offers the customer an 24-month functional warranty
on the instrument for faulty workmanship or parts from date of dispatch
from the distributor. In all cases, this warranty is valid for 36 months
from the date of production. This warranty is on a return to factory
basis.
The manufacturer does not accept liability for any damage caused by
instrument malfunction. The manufacturer accepts no responsibility for
the suitability of the instrument to the application for which it was
purchased.
Failure to install, setup or operate the instrument according to
the instructions herein will void the warranty.
Your instrument may be opened only by a duly authorized
representative of the manufacturer. The unit should only be opened in
a fully anti-static environment. Failure to do so may damage the
electronic components and will void the warranty.
NOTE
The greatest care has been taken to manufacture and calibrate your
instrument. However, these instructions do not cover all possible
contingencies that may arise during installation, operation or
maintenance, and all details and variations of this equipment are not
covered by these instructions.
For additional information regarding installation, operation or
maintenance of this instrument, contact the manufacturer or your local
representative or distributor.
IMPORTANT
Please read instructions contained in this manual before
performing installation, and take note of the following
precautions:
1. Ensure that all incoming AC power and other power sources
are turned OFF before performing any work on the instrument.
2. Check the labels on the side of the instrument before
connecting to the power source to ensure that your instrument is
equipped with the appropriate power supply voltage, input
voltages, currents, analog output and communication protocol for
your application.
2. Do not connect the instrument to a power source if it is
damaged.
3. Do not expose the instrument to rain or moisture.
To Next Page
Loading...
Need help?
General
