SATO CL4NX - Page 105

105
Type
[Empty]
Do not use custom commands.
[File]
Loadacustomcommandfromthespeciedle.
[Text]
Enterthecustomcommanddirectlyintothe[Contents]eld.
[Parsed text]
Enterthecustomcommanddirectlyintothe[Contents]eld.Youcanentercontrol
textasasubstituteentry.
[Parsed le]
Loadacustomcommandfromthespeciedle.Youcanentercontroltextintothe
leasasubstituteentry.
Note:
When printing a print layout created in an application (when outputting as an SBPL
command),thecustomcommandisinsertedintoeachpositionaccordingtothecustom
command insertion position setting in the printer driver.
Theguresbelowshowanimageofthecustomcommandinsertionpositionwhenthe
printlayoutandprintsettingsareusedinanapplication.
• "Test"intheprintlayoutissetto"SATOX24"devicefont(theSBPLcommandis<X24>).
• Thenumberofcopiesissetto[3].