SATO CL4NX - Configuring the Interface Settings

111
5. Sharing the Printer
You can share a printer connected directly to a computer on the network with other
computers.
Connecting When Using the Printer Driver with Sharing Settings
The gure below shows how to connect when using the printer driver with sharing
settings.
LAN
PC-1 PC-2 PC-3
Printer
Client
Print server
PC-0
LAN
USB
Bluetooth
RS-232C
IEEE1284
Setonecomputer(PC-0)astheprintserverandsetothercomputers(PC-1,PC-2,PC-3,
etc.)asclients.AllcomputersshouldbeconnectedusingLANconnectionandtheprint
serverandprintershouldbeconnectedviaUSB,Bluetooth,RS-232CorIEEE1284.
Procedure to Congure Printer Driver Sharing Settings
Tousetheprinterdriverwithsharingsettings,followthestepsbelow:
1. Install the printer driver on the print server and client computers.
Refer to "5.1 Installing the Printer Driver on the Print Server and Client Computers".
2. Conrm that a label was printed correctly from the printer connected to the print
server.
3. Congurethesharingsettingsontheprinterconnectedtotheprintserver.
Referto"5.2ConguringSharingSettingsonthePrintServerPrinter".
4. Specify the printer connected to the print server setup for sharing as the output
destination port for the client printer and disable bi-directional communication on the
client printer.
Referto"5.3ConguringSharingSettingsontheClientPrinter".