SATO CL4NX Manual

98
[Barcode darkness] (PW208NX/PW208mNX only)
Currentlynotsupported.
[Barcode darkness range] (PW208NX/PW208mNX only)
Currentlynotsupported.
O󰀨set
[Top]
You can adjust the print base reference point in vertical direction (the height
directionofthemedia).
[Left]
You can adjust the print base reference point in horizontal direction (the width
directionofthemedia).
Advanced Settings (CL4NX/CL6NX/CL4NX Plus/CL6NX Plus/CT4-LX/FX3-LX/
PW4NX/S84NX/S86NXonly)
[Send static elements only on rst page (Overlay function)]
Allstaticelementswillbesenttoonlytherstpageoftheprintjob.Onlyvariable
elementswillbesentforsubsequentpages.Staticelementsarecalledfromprinter
memory.
[Set xed document length for continuous label]
Sendtheentirelabeltoanappropriatepositionaftertheprinternishesprinting.
Foracontinuouslabel,theonelabelisthefeedamountbecausethefeedamount
cannotbedeterminedbythesensor.
[Non-standard protocol output]
SubstituteandoutputpartofthecontrolcodeasASCIIreadablecharacters.This
featureisforhostenvironmentsthatcannotusebinarydata.
[Use legacy calendar print command] (CL4NX/CL6NX/CL4NX Plus/CL6NX Plus/
CT4-LX/FX3-LX only)
Thisworkswhenlinkedwith"NiceLabel”oftheapplication.Ifchecked,[ESC+WA]
isusedasthecalendarprintcommand,andifunchecked,[ESC+WU]isused.
[Use legacy RFID locking command] (CL4NX/CL4NX Plus/CL6NX Plus/CT4-LX/
S84NX/S86NX only)
SelecttheformatoftheRFIDlockingcommand.Ifchecked,thelegacy"lck"format
RFIDlockingcommandisused,andifunchecked,the"lc2"formatRFIDlocking
command is used.

SATO CL4NX Specifications

General

Wi-Fi	No
Ethernet LAN	Yes
Flash memory	2000 MB
Storage media	Flash
Internal memory	256 MB
Built-in barcodes	Code 39, Code 93, Code-128 Codabar Library, EAN13, EAN8, GS1 DataBar, Industrial 2/5, Interleaved 2/5, Matrix 2/5
Internal storage capacity	2 GB
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	30 - 90 %
Operating relative humidity (H-H)	30 - 80 %
Maximum roll diameter	220 mm
Maximum printing width	104 mm
Printing media thickness	0.06 - 0.26 µm
Display type	LCD
Product color	Black
Display diagonal	3.5 \
Display resolution	320 x 240 pixels
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
USB connector	USB Type-A / USB Type-B
Bluetooth version	3.0
Serial interface type	RS-232C
USB 2.0 ports quantity	2
Connectivity technology	Wired & Wireless
Type	POS printer
Print speed	10 ips
Print technology	Direct thermal / Thermal transfer
Maximum resolution	203 x 203 DPI

Weight and Dimensions

Depth	457 mm
Width	271 mm
Height	321 mm
Weight	15000 g