Unit 5: Optional Command Codes
SATO GL4xxe SBPL Programming Reference Page 5-4
CALENDAR CONFIGURATION
FUNCTION
To set the time and date of the printer’s internal clock.
FORMAT
<ESC>WTaabbccddee
aa = Year (00 to 99)
bb = Month (01 to 12)
cc = Day (01 to 31)
dd = Hour (00 to 23)
ee = Minute (00 to 59)
Place anywhere within the data stream.
EXAMPLE
<ESC>A
<ESC>WT9312251300
<ESC>Z
OUTPUT
There is not a printer output as a result of this command.
NOTES
Once the year increments past “99” it will wrap back to “00”. This command can only
be used once per data stream.
The printer’s internal clock may be set through the Calendar Set command.
If a print quantity of more than one label per job is used, the same time and date will
be on each label of the entire print job.
Calendar Increment Example: 1998 January 15 (ww=03) plus 48 weeks = week 51.
The Week Calendar specification follows ISO8601. Days of the week are numbered 1
through 7, beginning with Monday. The first week of the year is the week containing
the first Thursday. If January 1st falls on Friday, it belongs to the last week of the
previous year. If December 31st falls on a Wednesday, it belongs to the first week of
the following year. If Calendar Increment calculation extends over the year, the result
belongs to the week number of the following year.
To Next Page
Loading...
Need help?
General
