SATO GL 4xxe Series Programming Reference Guide

Unit 4: Standard Command Codes
SATO GL4xxe SBPL Programming Reference Page 4-19
JOURNAL PRINTING
FUNCTION
To print text in a line by line format on a label. By specifying this command, you
automatically select Font XS with a Character Expansion of 2x2. You also establish a
base reference point of H2,V2. The character pitch is 2 dots and the line gap is 16
dots. Simply issue an ASCII <CR> at the end of each text line.
FORMAT
<ESC>J
Place immediately following <ESC>A.
EXAMPLE
<ESC>A
<ESC>J WITH THE JOURNAL FEATURE YOU CAN PRINT TEXT WITHOUT
USING ANY FONT COMMANDS
OR POSITION COMMANDS
<ESC>Q1
<ESC>Z
OUTPUT
(4-14)
NOTES
Journal mode assumes a maximum label width. Otherwise, you may print where
there is no label and damage your print head.
It is effective only for the current print job.

SATO GL 4xxe Series Specifications

General

Brand	SATO
Model	GL 4xxe Series
Category	Barcode Reader
Language	English