SATO GL 4xxe Series Programming Reference Guide

Unit 5: Optional Command Codes
SATO GL4xxe SBPL Programming Reference Page 5-7
MEMORY CARTRIDGE FORMAT
FUNCTION
To format the memory cartridge.
FORMAT
<ESC>FMaaaaaaaa
a = “User ID” [Up to 8 bytes of alphanumeric and symbol (omissible)]
EXAMPLE
<ESC>A
<ESC>CC1<ESC>FMSATO
<ESC>Z
NOTES
Specify slot No. with Card Slot for Use<CC>prior to this command. This command
cannot be used in combination with other commands. if formatting the card by
accident, registered data will be erased. We are not liable for any damages or loss
from such an occurrence. Printer needs to do “Optimize&Reboot” under
“ADVANCED” after formatting.
MEMORY CARTRIDGE PRINTING
FUNCTION
To start printing from memory cartridge..
FORMAT
<ESC>FP
EXAMPLE
<ESC>A
<ESC>CC1<ESC>FP
<ESC>Z
NOTES
This command cannot be used in combination with other commands. It will be printed
by width 100mm and pitch 100mm.

SATO GL 4xxe Series Specifications

General

Brand	SATO
Model	GL 4xxe Series
Category	Barcode Reader
Language	English