SATO GL 4xxe Series Programming Reference Guide

Unit 4: Standard Command Codes
SATO GL4xxe SBPL Programming Reference Page 4-52
PRINT AREA, ENLARGEMENT
FUNCTION
Specifies the print area to be standard height of 178 mm or enlarged to 356 mm.
FORMAT
<ESC>AR Standard print area
<ESC>AX Enlarged print area
Place after <ESC>A within the data stream.
EXAMPLE
<ESC>A
<ESC>AR
<ESC>Z
OUTPUT
(4-37)
NOTES
This command changes the print area of pitch direction.
Insert this command after Start of Data Transmission (<ESC>A). To return to the
standard print area, power off the printer to cancel the command.
PRINT END POSITION
FUNCTION
Changes the label stop position in the sensor invalid mode.
FORMAT
<ESC>EP
Place after <ESC>A within the data stream.
EXAMPLE
<ESC>A
<ESC>EP
<ESC>Z
OUTPUT
This command does not result in printer output.
NOTES
None.

SATO GL 4xxe Series Specifications

General

Brand	SATO
Model	GL 4xxe Series
Category	Barcode Reader
Language	English