Unit 4: Standard Command Codes
SATO GL4xxe SBPL Programming Reference Page 4-55
CUT, LAST
FUNCTION
Regulates label cutting when using a cutter assembly with the printer. This command
allows the cutting of a printed multi-part tag or label that is left in the printer after a job
is cut.
FORMAT
<ESC>~B
Place in a separate data stream sent to the printer.
EXAMPLE
<ESC>A
<ESC>~B
<ESC>Z
OUTPUT
This command will feed the last printed label to the cut position, cut the label and then
back feed to the head position in preparation for printing the next job.
(4-40)
NOTES
The optional cutter assembly must be installed and enabled to use this function.
To Next Page
Loading...
Need help?
General
