SATO GL 4xxe Series Programming Reference Guide

Unit 3: Command Quick Reference
SATO GL4xxe SBPL Programming Reference Page 3-5
BF Bookland. Prints a Bookland barcode.
a
= Narrow bar width (01 to 12 dots)
b
= Height of barcode (001 to 999 dots)
n
= Print data
BG CODE 128. Prints a CODE 128 barcode.
a
= Narrow bar width (01 to 12 dots)
b
= Height of barcode (001 to 999 dots)
n
= Print data
BI SSCC. Prints a SSCC barcode.
a
=
Narrow bar width (01 to 12 dots)
b
=
Barcode height (001 to 999 dots)
c
=
Barcode expository font specification
0: Without HRI
1: HRI available in upper part of barcode
2: HRI available in upper part of barcode
n
=
Barcode print data (17 digits fixed)
BJaa..abb..b True Type Font, Store. Prepares the Expanded Memory to accept True
Type font data.
aa...a
= 40 byte font description
bb...b
= 10 byte date field
BJDcccccddddee...e True Type Font, Download Bit Mapped Data. Downloads the bit mapped
TrueType font data to the memory area specified.
ccccc
= Memory Offset (hexadecimal)
dddd
= Data size in bytes (max = 2000)
ee...e
= Font data to be downloaded
BJFaaaaaaaa Card, Format. Initializes the Memory Area and formats it for use. Should
be preceded by the Memory Area Select command for the memory area to
be initialized.
aaaa....a
=
8 character alphanumeric password
BJS Print Memory Card Status. Reports the status of the currently active
Memory Card to the host by printing a status label.
COMMAND QUICK REFERENCE
INSTRUCTION DESCRIPTION

SATO GL 4xxe Series Specifications

General

Brand	SATO
Model	GL 4xxe Series
Category	Barcode Reader
Language	English