SATO GL 4xxe Series Programming Reference Guide

Unit 4: Standard Command Codes
SATO GL4xxe SBPL Programming Reference Page 4-15
FORM OVERLAY, STORE
FUNCTION
To store a label image in the volatile form overlay memory. Only one label image may
be stored in this memory area at a time.
FORMAT
<ESC>&
Must be preceded by all other data and placed just before Stop (<ESC>Z) command.
EXAMPLE
<ESC>A
<ESC>H0100<ESC>V0125
<ESC>STHIS IS THE STORED IMAGE WITH A BARCODE
<ESC>H0100<ESC>V0165<ESC>B103100*12345*
<ESC>
&
<ESC>Z
OUTPUT
This command does not result in printer output. It stores the label image in the
overlay buffer.
NOTES
Remember that this storage is volatile. Therefore, if the printer loses power, the
overlay must be sent again.
The overlay is recalled using the Form Overlay Recall (<ESC>/) command.
Form overlays do not have to be recompiled each time they are called to be printed
and therefore may result in much faster print output.
Refer to Appendix: Reference Table 7 for additional information.

SATO GL 4xxe Series Specifications

General

Brand	SATO
Model	GL 4xxe Series
Category	Barcode Reader
Language	English