SATO GL 4xxe Series Programming Reference Guide

Unit 4: Standard Command Codes
SATO GL4xxe SBPL Programming Reference Page 4-25
SMOOTHING FONTS: WB, WL, XB, XL
FUNCTION
To print text images on a label. These are the four auto-smoothing fonts available on
the printer.
FORMAT
Font WB: <ESC>WBa Font XB: <ESC>XBa
Font WL: <ESC>WLa Font XL: <ESC>XLa
a = 0: Disables auto-smoothing of font
1: Enables auto-smoothing of font (see notes below)
Place preceding the data to be printed.
EXAMPLE
<ESC>A
<ESC>PS
<ESC>H0001<ESC>V0100<ESC>WB0SATO
<ESC>H0001<ESC>V0185<ESC>WB1SATO
<ESC>H0001<ESC>V0270<ESC>WL0SATO
<ESC>H0001<ESC>V0355<ESC>WL1SATO
<ESC>H0300<ESC>V0100<ESC>XB0SATO
<ESC>H0300<ESC>V0185<ESC>XB1SATO
<ESC>H0300<ESC>V0270<ESC>XL0SATO
<ESC>H0300<ESC>V0355<ESC>XL1SATO
<ESC>Q1
<ESC>Z
OUTPUT
(4-19)
NOTES
Auto-smoothing (when enabled) is only effective if the character expansion rate is at
least (3) times in each direction.
Characters may be enlarged through the use of the Character Expansion (<ESC>L)
command.
Character spacing may be altered through the use of the Character Pitch (<ESC>A)
command.
A font must be defined for each field to be printed. There is no default font.

SATO GL 4xxe Series Specifications

General

Brand	SATO
Model	GL 4xxe Series
Category	Barcode Reader
Language	English