SATO GL 4xxe Series Programming Reference Guide

Unit 4: Standard Command Codes
SATO GL4xxe SBPL Programming Reference Page 4-27
OUTPUT
(4-20)
NOTES
The “cccc” Horizontal Size and “dddd” Horizontal Size parameters can be entered
either in dots or points, but both parameters must use the same value types. If point
size is used, the point size is preceded by a “P”.
Refer to Appendix: Reference Tables 20 & 21 for additional information.
FONT, RASTER

SATO GL 4xxe Series Specifications

General

Brand	SATO
Model	GL 4xxe Series
Category	Barcode Reader
Language	English