SATO WS408DT - Page 53

Configuration and Interface set up
WS4-DT/TT-r01-12.1.17-OM-RS
47
The second row of the toolbar includes six items.
￭ Printer Model Printer models.
￭ Printer Emulation The emulation language of your printer. The emulation
you choose affects the tabs displayed in the Properties pane.
￭ Printer DPI The print resolution of your printer. It provides 203 dpi and 300
dpi.
￭ Sync Get the current settings of Printer Model, Printer Emulation and
Printer DPI from your printer.
￭ Get Status Detect if your printer is ready for use.
￭ Printer Status It shows the result of Get Status.
Printer status
Status
Description
ON LINE (Ready)
The top cover (head) was closed in the online mode.
HEAD OPEN
The top cover (head) was opened in the online mode.
ON LINE
(Operating)
The printer is operating.
ACCESSED BY
OTHER
Exclusively accessed by other host.
PAUSE
In pause.
ON LINE (Waiting
for Stripping)
Waiting for stripping.
COMMAND
ERROR
A command error was found while analyzing the command.
COMMS ERROR
A parity error, overrun error or framing error occurred
during the RS-232C transmission.
PAPER JAM
A paper jam occurred during paper feed.
CUTTER ERROR
The cutter is experiencing issues.