SATO WS408DT - Page 54

Configuration and Interface set up
WS4-DT/TT-r01-12.1.17-OM-RS
48
Status
Description
NO PAPER
The label has run out.
HEAD OPEN
ERROR
Attempt to feed or issue the label with the top cover (head)
open.
HEAD ERROR
A broken pin has been found on the thermal head.
EXCESS HEAD
TEMP
The thermal head temperature has become excessively high.
NO PAPER (Last
label has been
issued)
The last label has been issued properly and the label has run
out.
MEMORY WRITE
ERROR
An error has occurred while writing data into the flash ROM
or USB memory.
FORMAT ERROR
An erase error has occurred in formatting the flash ROM or
USB memory.
MEMORY FULL
Saving failed because of the insufficient capacity of the flash
ROM or USB memory.
SAVING
In font or PC command save mode. (to flash ROM or to USB
memory)
The flash ROM or USB memory is being initialized.
SAVING ERROR
An EEPROM for backup cannot be read or written properly.
UPDATING
FIRMWARE NOW
The printer is updating firmware.
BLUETOOTH
ERROR
Bluetooth initialization error.
Bluetooth setting parameter error.
WIRELESSLAN
ERROR
WirelessLAN initialization error.
WirelessLAN setting parameter error.
UPDATING
FIRMWARE ERROR
An error occurred during the firmware update.
UNKNOWN
The status is unknown.