Set up LAN Connection
If you want to use the LAN port to transfer data, you need to set up the network
connection in the LAN tab.
1. Connect your printer and computer to a network device (hub, switch or router)
with Ethernet cables.
2. In the Input/Output Port list, click USB or COM.
3. In the Navigation pane, click Parameter Setting and click the LAN tab.
4. Do one of the following to configure your TCP/IP settings:
●
If you have a static IP address, fill the IP Address, Subnet Mask and Gateway
box under TCP/IP according to your network settings and click Send.
To Next Page
Loading...
