2. After your printer restarts, click Get to get its IPv6 information. If you are using
a static IPv6 address, you’ll get the same settings as it is in the previous step; if
you are using DHCPv6, the DHCPv6 server will automatically populate the IP
Address and Link-Local Address boxes under Current IPv6.
3. In the Input/Output Port list, click LAN, and click Setting.
4. In the Setting LAN dialog box, do one of the following to configure your IP
address:
●
If you are using a static IP address, in
the IP Address box, enter the IP
address under IPv6 in the IPv6 tab and
click OK.
To Next Page
Loading...
