3. In the SSID box, enter the network name you’ve connected and do one of the
following to enter your password:
●
If you’re using Open and WEP is on, choose your WEP password type in the
WEP
Input Type list. Next, enter your WEP password in one of the WEP Key box,
and
select the key you want to use from the WEP Key Index list.
●
If you’re using WPA-Personal or WPA2 Personal, enter your password in the
WPA Pre-Shared Key box.
●
If you’re using 802.1X, WPA-Enterprise or WPA2 Enterprise, choose your EAP
authentication method in the EAP Method list and enter your username and
password in EAP User Name and EAP Password boxes respectively. If you’re
using TTLS mode, you can choose the TTLS encryption method from the TTLS
Method list.
To Next Page
Loading...
